Index
PCI/PXI-1408 and NI-IMAQ for Win95/NT
I-4
©
National Instruments Corporation
histograph, for testing configuration, 5-23
horizontal count, 3-7
HSYNC
acquisition window control, 3-6
genlock and synchronization
circuitry, 3-3
PCLK, HSYNC, VSYNC mux, 3-4
start and stop settings for camera, 5-9
HSYNCIN± signal (table), 4-2
hue
32-bit HSL and HSI, B-9
defined, B-7
hue, saturation, luminance, and intensity
planes, B-9
Hue Offset Angle, StillColor dialog box, 5-14
I
Image Representation control, StillColor
dialog box, 5-13
image storage, 5-24
IMAQ Vision for G software, 1-4
IMAQconf configuration utility, 5-1 to 5-24
Camera tab, 5-4 to 5-11
advanced camera settings, 5-9 to 5-11
basic camera settings, 5-7 to 5-8
Description tab, 5-2 to 5-3
image storage, 5-24
LUT tab, 5-15 to 5-19
Operating Mode tab, 5-19 to 5-22
overview, 5-1
saving your configuration, 5-22
StillColor Modes dialog boxes
(figure), 5-2
StillColor settings, 5-12 to 5-14
testing your configuration, 5-22 to 5-23
installation. See also configuration.
procedure for, 2-5 to 2-7
setting up IMAQ system, 1-7 to 1-8
unpacking the PCI-1408, 1-7
intensity
defined, B-8
hue, saturation, luminance, and intensity
planes, B-9
Interlace setting, for camera, 5-8
interlaced video, 3-9
internal pixel clock specifications, A-3
I/O connector, 4-1 to 4-3
avoiding VIDEO0 connection with BNC
connector, 4-1
custom cable specifications, C-1
pin assignments (figure), 4-2
signal descriptions (table), 4-2 to 4-3
VIDEO0 input, 2-3 to 2-4
J
jumpers
W1
input mode control for VIDEO0
input, 2-3 to 2-4
required for BNC input (note), 4-1
W3, external CLK and synchronization
input mode, 2-4
L
LabVIEW software, 1-4
line count
definition, 3-7
programmable pixel and line count, 3-8
line region, active, 3-7
lock mode, external, 3-10
lookup table. See also LUT tab, IMAQconf.
8-bit ADC and LUT, 3-3
luminance
32-bit HSL and HSI, B-9
defined, B-8
hue, saturation, luminance, and intensity
planes, B-9