![background image](http://html.mh-extra.com/html/national-instruments-corporation/imaq-pci-1408/imaq-pci-1408_getting-started_710256100.webp)
Index
©
National Instruments Corporation
I-3
PCI/PXI-1408 and NI-IMAQ for Win95/NT
documentation
conventions used in manual, x-xi
National Instruments documentation, xi
organization of manual, ix-x
related documentation, xii
DSUB port. See I/O connector.
E
electronic support services, D-1 to D-2
e-mail support, D-2
environment specifications, A-4
equipment, optional, 1-6
external CLK and synchronization input
mode, 2-4
external connection specifications, A-2 to A-3
external lock mode
description, 3-10
Slave Acquisition Mode, 5-21
F
fax and telephone support, D-2
Fax-on-Demand support, D-2
field, for interlaced video signal, 3-8
FIELD start and stop settings for camera, 5-11
FIFO buffer, 3-4
formats supported, A-1
frame
definition, 3-8
frame/field selection, 3-6
Frame tmo/ms setting, Operating Mode
tab, 5-22
FTP support, D-1
functional overview, 3-1 to 3-5
G
Gain, setting for camera, 5-8
gain and offset circuitry, programmable, 3-2
genlock and synchronization circuitry, 3-3
GND signal (table), 4-3
Grab button
becoming Multi-snap button in StillColor
mode, 5-22
testing configuration, 5-22
valid only in monochrome mode
(note), 5-22
H
hardware overview, 3-1 to 3-10
8-bit ADC and LUT, 3-3
acquisition and region-of-interest
control, 3-4
acquisition modes, 3-10
antichrominance filter, 3-2
block diagram, 3-2
board configuration NVRAM, 3-5
CSYNC mux, 3-3
FIFO buffer, 3-4
functional overview, 3-1 to 3-5
genlock and synchronization
circuitry, 3-3
PCI interface, 3-5
PCLK, HSYNC, VSYNC mux, 3-4
pixel aspect ratio circuitry, 3-3
programmable gain and offset, 3-2
RTSI bus, 3-4
scatter-gather DMA controllers, 3-5
trigger control and mapping circuitry, 3-4
VCO and PLL circuitry, 3-3
video acquisition, 3-6 to 3-9
acquisition window control,
3-6 to 3-8
programming video parameters,
3-8 to 3-9
start/stop conditions, 3-6
video mux, 3-2
HCOUNT, setting for camera, 5-11