![background image](http://html.mh-extra.com/html/national-instruments-corporation/imaq-pci-1408/imaq-pci-1408_getting-started_710256102.webp)
Index
©
National Instruments Corporation
I-5
PCI/PXI-1408 and NI-IMAQ for Win95/NT
LUT tab, IMAQconf, 5-15 to 5-19
binary LUT, 5-18
exponential LUT, 5-17
illustration, 5-15
inverse binary LUT, 5-19
inverse LUT, 5-16
log LUT, 5-17
normal LUT, 5-16
M
manual. See documentation.
mapping circuitry, 3-4
Max Buffers setting, Operating Mode
tab, 5-22
M-NTSC color standard, B-1
Mode, setting for camera, 5-7
Multi-Snap button (note), 5-22
N
National Instruments application software, 1-4
NGate start and stop settings for camera, 5-10
NI-IMAQ driver software, 1-5 to 1-6
NVRAM, 3-5
O
Operating Mode tab, IMAQconf, 5-19 to 5-22
CSYNC source, 5-21
illustration, 5-20
Misc Settings, 5-21 to 5-22
Frame tmo/ms, 5-22
Max Buffers, 5-22
PCLK Select, 5-22
Scale, 5-22
StillColor Mode, 5-21 to 5-22
Signal Polarity, 5-21
Slave Acquisition Mode, 5-20 to 5-21
StillColor Mode, 5-21 to 5-22
Composite, 5-22
Disabled, 5-21
RGB, 5-21
P
PAL color standard, B-1
parts locator diagram
PCI-1408, 2-2
PXI-1408, 2-3
PCI interface
overview, 3-5
specifications, A-3 to A-4
PCI/PXI-1408 devices. See also hardware
overview.
features and overview, 1-1 to 1-2
optional equipment, 1-6
requirements for getting started, 1-3
setting up IMAQ system, 1-7 to 1-8
software programming choices, 1-4 to 1-6
National Instruments application
software, 1-4
NI-IMAQ driver software, 1-5 to 1-6
unpacking, 1-7
PCLK
acquisition window control, 3-6
genlock and synchronization
circuitry, 3-3
internal pixel clock specifications, A-3
Operating Mode tab setting, 5-22
PCLK, HSYNC, VSYNC mux, 3-4
PCLKIN± signal (table), 4-2
physical specifications, A-4
picture aspect ratio, 3-7
pin assignments
BNC connector (figure), 4-1
I/O connector (figure), 4-2
pixel aspect ratio
correction, setting for camera, 5-11
defined, 3-7