![background image](http://html.mh-extra.com/html/national-instruments-corporation/imaq-pci-1408/imaq-pci-1408_getting-started_710256098.webp)
©
National Instruments Corporation
I-1
PCI/PXI-1408 and NI-IMAQ for Win95/NT
Index
Numbers
+5V signal (table), 4-3
8-bit ADC and LUT, 3-3
32-bit HSL and HSI, B-9
A
acquisition and region-of-interest control, 3-4
acquisition modes, 3-10
acquisition window
controlling, 3-6 to 3-8
programming video parameters, 3-9
setting for camera, 5-8
active line region, 3-7
active pixel region, 3-7
A/D conversion specifications, A-2
ADC, 8-bit, 3-3
antichrominance filter, 3-2, 5-8
aspect ratio. See pixel aspect ratio.
Auto Expos. setting for camera, 5-8
Averaging control, StillColor dialog box, 5-13
B
B/G-PAL color standard, B-1
Blank Start and Blank Stop settings, StillColor
dialog box, 5-13 to 5-14
BNC connector
avoiding VIDEO0 connection with 25-pin
DSUB connector (note), 4-1
pin assignments (figure), 4-1
signal connections, 4-1
VIDEO0 input, 2-3
board configuration. See configuration.
Brightness (IRE) parameter, StillColor dialog
box, 5-12
bulletin board support, D-1
Burst Start and Burst Stop settings, StillColor
dialog box, 5-13
C
cables
custom cable specifications, C-1
optional equipment, 1-6
required cables, 1-3
Camera tab, IMAQconf, 5-4 to 5-11
Acquisition Window, 5-8
Advanced button, 5-4
advanced camera settings, 5-9 to 5-11
Aspect Ratio Correction, 5-11
Auto Expos., 5-8
Basic button, 5-4
basic camera settings, 5-7 to 5-8
Camera Description, 5-7
Camera Type, 5-7
Chroma Filter, 5-8
CLAMP Start and CLAMP Stop, 5-10
composite color video line (figure), 5-6
FIELD Start and FIELD Stop, 5-11
Gain, 5-8
HCOUNT, 5-11
HSYNC Start and HYSYNC Stop, 5-9
illustration, 5-4
Interlace, 5-8
Mode, 5-7