![background image](http://html.mh-extra.com/html/national-instruments-corporation/imaq-pci-1408/imaq-pci-1408_getting-started_710256044.webp)
Chapter 5
Configuration Utility
PCI/PXI-1408 and NI-IMAQ for Win95/NT
5-4
©
National Instruments Corporation
Camera Tab
The Camera tab stores a list of available cameras and camera settings.
You can modify existing camera settings or create a new camera file by
saving the existing camera file via the File»Save As... menu selection.
Figure 5-3 shows each item included in this tab.
Figure 5-3. Camera Tab
You use
IMAQconf
to configure each active video channel. You can
configure only one video channel at a time. You can access VIDEO0
through the BNC connector or the 25-pin DSUB connector. You can
access all other video signals only via the 25-pin DSUB connector.
The Camera tab includes four buttons that pop up additional
configuration dialog boxes. These buttons are as follows:
•
Basic—This button brings up the Basic camera settings dialog box
shown in Figure 5-6.
•
Advanced—This button brings up the Advanced camera settings
dialog box shown in Figure 5-7.