Chapter 1
Introduction
©
National Instruments Corporation
1-7
PCI/PXI-1408 and NI-IMAQ for Win95/NT
Unpacking
Your 1408 device is shipped in an antistatic package to prevent
electrostatic damage to the board. Electrostatic discharge can damage
several components on the board. To avoid such damage in handling the
board, take the following precautions:
•
Ground yourself via a grounding strap or by holding a grounded
object.
•
Touch the antistatic package to a metal part of your computer
chassis before removing the board from the package.
•
Remove the board from the package and inspect the board for loose
components or any other signs of damage. Notify National
Instruments if the board appears damaged in any way. Do not
install a damaged board in your computer.
•
Never touch the exposed pins of connectors.
How to Set up Your IMAQ System
Use Figure 1-2 to install your software and hardware, configure your
hardware, and begin using NI-IMAQ in your application programs.
If you will be accessing the NI-IMAQ device drivers through LabVIEW
or BridgeVIEW, you should read the NI-IMAQ release notes and the
NI-IMAQ VIs for G Reference Manual to help you get started.
