NARGESA C2006, Manual, Page: 33 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 32
View the inputs to the shears in real time from this window.
View the outputs from the shears in real time from this window.
5.19. Material management
The shears are able to cut various materials with different widths. They can all be defined in a specific table
to manage them suitably.
Press the button and then when the menu window appears. On doing so the window below is
displayed:
The shears are supplied from the factory with a standard materials table. Materials can be added, changed
and removed from this table. Use the icons located at the bottom of the screen to do so.
Create a new material by specifying the name and its resistance.
The material name and resistance can be changed by selecting it from the table.
The selected material can be removed from the table.