NARGESA C2006, Manual, Page: 10 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 9
WARNING: Stop the machine to make the maintenance.
3. MAINTENACNE
3.1. General maintenance
The maintenance of the Shear implies four operations:
- Oil change
- Lubrication of bolts
- Lubrication of the guides
- Lubrication of the gauge spindles
3.1.1. Oil change
The oil container level must be checked every 1000 hours of work.
The oil level sight-glass is located at the side of the tank. If oil needs to be added, fill until the sight-glass is
completely full.
Replace the hydraulic oil container every 4000 hours of work or 60 months.
Container capacity: 73 liters.
Oil: CEPSA HYDRAULIC HM 68
Once the oil has been changed, it is necessary to start up the machine and activate the pedal in
intermittence by increasing the pressure time gradually until the circuit is full.
Drain plug
Oil dipstick
Oil level sight-glass