NARGESA C2006, Manual, Page: 14 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 13
Star figure
(Default)
For voltage 400V
Triangle figure
For voltage 230V
4.3. Admisible outer conditions
It is advisable to work under the following atmospheric conditions:
- Room temperature b5 °C and +40 ºC without exceeding an average temperature of +35 °C
within 24 hrs
- Humidity between 30% and 90% without water condensation
4.4 Connection to power supply
The C2006 shears are equipped with two three-phase 230/400 V motors: a 0.37 kW motor for the gauge,
and a 5.5 kW star-connected motor which requires a single 240V or 400V power supply. If the line voltage
is not as indicated, then the motor coil connection and the gauge motor variable frequency drive (VFD) con-
nection shall be changed. The gauge VFD is NOT A MULTI-VOLTAGE VFD, so if the voltage needs to be
changed, then the VFD should be replaced accordingly.
Picture 7. Change of engine connections
IMPORTANT
This machine must be connected to a power supply with ground wire.