NARGESA C2006, Manual, Page: 28 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 27
5.13. Lateral length of the cut
The maximum lateral length of a cut to be made on a sheet is specified at the factory and cannot be
changed, as this parameter is implicitly related to the machine structure and dimensions. However, the
width or lateral length of a cut can be specified within these minimum and maximum levels.
This parameter can be changed in both manual and automatic operating modes and is identified with the
icon. Press the numerical value displayed on the right and the following window will appear:
Now enter a new width value for the side of the sheet, between the minimum of 0 and the maximum lateral
measurement specified at the factory.
By changing this value, the upper shear blade will only be lowered to the position required to cut the sheet
at the specified width, thereby reducing the vertical displacement of the machine to the minimum amount
required.
The advantage of this is that it reduces the time to make each of the sheet cuts, optimising the operations
in an efficient way.
5.14. General emergency
The shears have two emergency stop buttons: one on the front, below the control touch screen, and
another in the area above the cutting pedal. When one or both of the buttons are pressed, the machine
stops immediately. The following pop-up message appears on the screen during an emergency stop
situation.