NARGESA C2006, Manual, Page: 22 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 21
Automatic mode is similar to manual mode, with the option of specifying various operational steps with
different cut dimensions. These specifications are saved within a program.
A program only contains one step by default when it is created, but more steps can be added by selecting
the following tab:
By doing so a screen appears with a new step and a new cut dimension (0.0 by default) which can be
modified and set to the desired value. An example is displayed in the following figure:
Follow the same procedure to add more steps.
To remove a step, first select it by clicking on the corresponding tab. Then press the icon which is
displayed in the top right corner of the window. The information on the screen changes to the following:
Confirm the command to delete the current step by pressing or cancel the operation by pressing
If we want to do several cuts with the same dimensions, then we can specify the number of repetitions
required instead of creating several successive steps with the same dimensions. To do so, press
and specify the number of repetitions for the current step.
We can also specify the number of repetitions for the current program. To do so press
and specify the number of repetitions for the program.