NARGESA C2006, Manual, Page: 11 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 10
3.1.2. Lubrication of bolts
To carry out the maintenance in the later grease points of the machine, we put the folding group down to its
lowest point.
We stop the machine and proceed to the lubrication in the indicated points.
Grease up the bolts periodically according to the level of use.
If it is a steady and daily use, they must be greased avery month.
Rear view of the machine
3.1.3. Lubrication of the guides
In order to attain the maintenance in the lateral lubrication points of the machine, we raise the folding group
to its highest point.
We stop the machine and proceed to the lubricate the indicated parts.
Lubricate all guides greasers every month.
Side view of the machine