NARDA PMM ER9000, User Manual

Page: 94 / 106

7-28 Remote control
7.7 Sweep Mode
commands
sequence
example
This is the sequence used by the PMM Emission Suite when a scantable is run, in
the “conducted” range (Band B from 0.15 to 30 MHz).
Example
Command sent Reply received Description
#?IDN* Queries information about model, release and date of the firmware
IDN=ER9000-FW - Opt.1 - 0.52
21/21 It is a ER9000/01 with its FW
It is used to check congruencies, frequency limits, and all the related
characteristics
#?MAA* Queries the maximum available attenuation
MAA= 55 Maximum available attenuation is 55 dB
#?BWL* Queries the RBW filters list
#ER&BWL 0; 3
MHz*#ER&BWL 1; 2
MHz*#ER&BWL 2; 1
MHz*#ER&BWL 3; 500
kHz*#ER&BWL 4; 300
kHz*#ER&BWL 5; 200
kHz*#ER&BWL 6; 100
kHz*#ER&BWL 7; 50
kHz*#ER&BWL 8; 30
kHz*#ER&BWL 9; 20
kHz*#ER&BWL 10; 10
kHz*#ER&BWL 11; 5
kHz*#ER&BWL 12; 3
kHz*#ER&BWL 13; 2
kHz*#ER&BWL 14; 1
kHz*#ER&BWL 15; 500
Hz*#ER&BWL 16; 300
Hz*#ER&BWL 17; 200
Hz*#ER&BWL 18; 100
Hz*#ER&BWL 19; 50
Hz*#ER&BWL 20; 30
Hz*#ER&BWL 21; 20
Hz*#ER&BWL 22; 10
Hz*#ER&BWL 23; 1 MHz-
C*#ER&BWL 24; 120 kHz-
C*#ER&BWL 25; 9 kHz-
C*#ER&BWL 26; 200 Hz-
C*#ER&BWL END*
Available RBW filters list