NARDA PMM ER9000, User Manual

Page: 20 / 106

2-2 Installation
2.5.2 Switch ON
pushbutton with
integrated led
To switch the unit ON, press the square button and keep it pressed till the
led lights up, then release the button; the boot sequence takes place
automatically.
When the led inside the button becomes green, the instrument is ready for
use.
The led inside the button is red until the unit is ready.
2.6 Environment The operating environment of the receiver is specified to be within the
following limits:
•
Temperature
•
Humidity
•
Altitude
-5° to +45° C
< 90% relative
4000 meters
The instrument should be stored and shipped in a clean, dry environment
which is specified to be within the following limitations:
•
Temperature
•
Humidity
•
Altitude
-40° to + 50° C
< 95% relative
15.000 meters