NARDA PMM ER9000, User Manual

Page: 11 / 106

General Information 1-3
1.7 Main Specifications
Table 1-1 lists the PMM ER9000 performance specifications.
The following conditions apply to all specifications:
•
The ambient temperature shall be -5°C to 45°C
TABLE 1-1 Main Specifications
Frequency
Range
Resolution
Reference frequency
10 Hz to 30 MHz (Opt. 00) 10 Hz to 3 GHz (Opt. 01)
0.1 Hz; 10 Hz above 30 MHz (Opt. 01)
< 1 ppM
Spectrum analysis method FFT, size up to 8192, minimum overlap 89%
RF input
VSWR
10 dB RF att.
0 dB RF att.
Attenuator
Preamplifier gain
Pulse limiter
Z
in
50 Ω, N fem.
< 1.2; < 2 above 1 GHz
< 1.6; < 2 above 30 MHz
0 dB to 55 dB (5 dB steps)
20 dB; 10 dB above 30 MHz Low saturation preamplifier (after preselector)
20 dB; 10 dB above 30 MHz Low noise preamplifier (before attenuator)
Built in (selectable) below 30 MHz
Max input level
(without equipment damage)
Sinewave AC
Voltage pulse spectral density
Max. pulse voltage
Max. DC voltage
140 dBuV (2 W); 137 dBuV (1 W) above 30 MHz
176 dBuV/MHz below 150 kHz; 130 dBuV/MHz below 30 MHz; 97 dBuV/MHz below 1 GHz
200V (≤ 20 us)
25V; 50V above 1 kHz
Preselector
Frequency ranges
(Thirteen BP filters – 7.5 / 15 MHz BW to ADC)
10 Hz to 9 KHz 22.5 MHz to 30 MHz
1 kHz to 9 kHz 15 MHz to 30 MHz
9 kHz to 150 kHz 30 MHz to 96.6 MHz tracking (Opt. 01)
150 kHz to 7.5 MHz 96.6 MHz to 311 MHz tracking (Opt. 01)
7.5 MHz to 15 MHz 311 MHz to 1000 MHz tracking (Opt. 01)
150 kHz to 15 MHz 1 GHz to 3 GHz (Opt. 01)
15 MHz to 22.5 MHz
IF bandwidth
3 and 6dB
CISPR 16-1-1
10 Hz, 20 Hz, 30 Hz, 50 Hz, 100 Hz, 200 Hz, 300 Hz, 500 Hz
1 kHz, 2 kHz, 3 kHz, 5 kHz, 10 kHz, 20 kHz, 30 kHz, 50 kHz, 100 kHz, 200 kHz, 300 kHz,
500 kHz, 1 MHz, 2 MHz, 3 MHz
200 Hz, 9 kHz, 120kHz, 1 MHz
Displayed Average Noise Level
Preselector OFF, preamplifiers OFF, HT 1s
Preselector OFF, low noise preamplifier ON, HT 1s
Preselector ON, preamplifiers OFF, HT 1s
Preselector ON, low dist. preamplifier ON, HT 1s
9 kHz to 150 kHz (200 Hz RBW) < -17 dBuV
0.15 MHz to 30 MHz (9 kHz RBW) < 0 dBuV
30 MHz to 300 MHz (120 kHz RBW) < 4 dBuV (Opt. 01)
300 MHz to 3 GHz (120 kHz RBW) < 10 dBuV (Opt. 01)
9 kHz to 150 kHz (200 Hz RBW) < -32 dBuV
0.15 MHz to 30 MHz (9 kHz RBW) < -19 dBuV
30 MHz to 300 MHz (120 kHz RBW) < -9 dBuV (Opt. 01)
300 MHz to 3 GHz (120 kHz RBW) < -4 dBuV (Opt. 01)
9 kHz to 150 kHz (200 Hz RBW) < -14 dBuV
0.15 MHz to 30 MHz (9 kHz RBW) < 3 dBuV
30 MHz to 300 MHz (120 kHz RBW) < 1 dBuV (Opt. 01)
300 MHz to 3 GHz (120 kHz RBW) < 6 dBuV (Opt. 01)
9 kHz to 150 kHz (200 Hz RBW) < -27 dBuV
0.15 MHz to 30 MHz (9 kHz RBW) < -14 dBuV
30 MHz to 300 MHz (120 kHz RBW) < -5 dBuV (Opt. 01)
300 MHz to 3 GHz (120 kHz RBW) < 0 dBuV (Opt. 01)
Detectors Peak, Quasi-Peak, RMS, Average, RMS-Average, C-Average.
Smart Detector function above 30 MHz (Opt. 01)