X
GEM-P1632 Programming Instructions
L
NAPCO Security Systems
!
Page 20
This is an extension of the Dealer Program Mode. This method of programming is used in conjunction with the Keypad
Programming Worksheets that follow. Refer to these worksheets to identify the 4-digit location (address) of the feature
to be programmed. An illustrative example is provided on the next page.
KEYPAD PROGRAMMING OVERVIEW
Direct Address Programming allows you to go directly to the address
locations and change the data entries to customize your control
panel options. Whereas the Easy Menu Program Mode is a simple
quick start guide with limited options, the Direct Address Program
Mode is more flexible allowing you to change all the options.
It consists of multiple address locations with two data entry locations
each (left and right) as shown in the adjacent diagram.
ACCESSING DIRECT ADDRESS PROGRAM MODE
LEFT DIGIT RIGHT DIGIT
3
C
DATA ENTRY
LOCATIONS
ADDRESS
LOCATIONS
0000
0000
TO
1198
HEXADECIMAL DATA:
•
BLANK (•) = No Options
•
1 to 9 = Entries 1 to 9
•
0 = Entry of 10
•
B to F = Entries 11 to 15
1. Press
EEEEEE
R
2. Press the PRIOR/NO
(
Q
)
button
until:
"
TURNON PROG Y/N
"
(GEM-RP2ASe2/GEM-K2AS)
--or--
"
17
"
(GEM-RP3DGTL/GEM-K3DGTL or GEM-RP4RFC/GEM-
K4RF) appears on the keypad display.
3. Press the NEXT/YES
(
P
)
button
to enter Dealer Program Mode.
(The panel and keypad version appears briefly on the keypad display).
4. Press
C
to exit Easy Menu Driven Program Mode & enter
Direct Address Program Mode.
(For keypad display examples when in Program Mode, see next page).
Dealer Security Code
(Default is 456789)
DIRECT ADDRESS PROGRAM MODE
Di
rec
t
A
d
dre
ss
P
rogr
am Mode