NAD
32
NAD ELECTRONICS LTD
LONDON
© 1994 310 I.M.
SPECIFICATION - NAD 310 INTEGRATED AMPLIFIER
Power Amplifier Section
Stereo Mode
CONTINUOUS AVERAGE POWER OUTPUT INTO 8
20 W
(Min. power per channel, 20Hz-20kHz, both
channels driven, with no more than rated
distortion)
Rated distortion (THD 20Hz-20kHz)
0.05%
Clipping
power 25
W
(maximum continuous power per channel)
IHF dynamic headroom at 8
+3 dB
IHF dynamic power
8
:
40 W
(17 dBW)
4
:
60 W
(17.8 dBW)
2
:
80 W
(18.7 dBW)
Slew rate
>20 V/usec
Damping factor (ref. 8
50Hz)
>100
Input impedance
N/A
Input sensitivity (for rated power into 8 )
1 V
Voltage gain
X 60(35.6dB)
Frequency response 20Hz - 20kHz
+ 0.3 dB
-3dB at 10Hz/70 kHz
Signal/Noise ratio, A weighted
Min. vol.. 100dB ref. 1W
THD (Total Harmonic Distortion, 20Hz-20kHz,
<0.05%
from 250mW to rated output)
SMPTE I.M. (IM distortion, 60Hz+7kHz, 4:1,
<0.05%
from 250mW to rated output)
IHF I.M.
<0.05%
(CCIF IM distortion, 19+20kHz at rated output)
Preamplifier Section
Phono Input
Input impedance (R and C)
n/a
Input sensitivity (ref. rated power, 1kHz)
n/a
Input overload at 20Hz/1kHz/20kHz
n/a
THD (20Hz-20kHz) and IM dist.
n/a
RIAA accuracy
n/a
Signal/Noise ratio
n/a
(A-weighted with cartridge connected)
Line Level Inputs (CD, Video, Tuner, Tape, Aux)
Input impedance (R and C)
80 k
+ 220 pF
Input sensitivity (ref. rated power)
210 mV
Maximum input signal
>10 V
Signal/Noise ratio, A-weighted
93 dB ref. 1W
106 dB ref. rated power
Frequency response 20Hz-20kHz
+0.5 dB
Infrasonic filter
-3dB at 10 Hz
12 dB/octave
Line Level Outputs
Preamp output impedance
n/a
Tape output impedance
n/a
Headphones output impedance
n/a
Maximum output level
preamp-out
n/a
tape out
>5 V
headphones out
n/a
Controls
Treble
+7dB at 100Hz
Bass
+6dB at 10kHz
Physical Specification
Dimensions in mm (Width x Height x Depth)
435 x 65 x 250
