20
Adjusting work piece holder cylinders
To ensure correct functioning of the machine, the work piece holder cylinders must slightly
push on the work piece. Carry out their adjustment as follows:
-
Turn the hand wheel in the upper part of the work piece holder (position E, Fig. 5.3.2)
to adjust the holder cylinder height.
-
Adjust the cylinders so that they push on the work piece slightly, and check their
correct position by reading the value (dimension A, Fig. 5.3.1.0) on the pertinent
graduated scale (position F, Fig. 5.3.2). The upper edge of the cylinder bar is the
guideline.
Fig. 5.3.2