14
4.3
Dismantling and disposal
When dismantling the UZ15 Rapid machine, keep in mind it is made of safe materials. They
involve in particular:
- enamelled and plated ferritic steel;
- stainless steel, series 300/400;
- plastic materials of various characteristics;
- hydraulic oil;
- electric motor;
- electrical cables with corresponding sheaths;
- electrical monitoring and exciting equipment.
Follow this procedure:
- Observe the regulation concerning work environment safety valid in your country.
- Disconnect the machine from the power supply.
- Dismount the machine; classify the parts according to their chemical characteristics.
- Scrap the machine parts in conformity with the regulations valid in your country.
- During dismantling, strictly follow valid work safety regulations.
USAGE
Correct usage
The bevelling machine model UZ 15 Rapid has been designed, manufactured and sold for the
purpose of bevelling the following kinds of metal parts and rolled metals:
iron, steel up to
R=60kg/mm
2
, stainless steel, brass, copper and aluminium.
The maximum bevel dimensions and processed material thickness are indicated in detail in
chapter 3, paragraph 3.2, “Technical specifications”.
Usage other than that described above is forbidden. Strictly speaking, it is forbidden to:
- process products different to those for which the machine has been designed and sold;
- modify operation of the machine;
- replace parts with non-original ones;
- modify electrical connections and bypass internal safety devices in this way;
- remove or modify protective guards;
- operate the machine in places with aggressive environment.
Attention:
It is strictly forbidden to bevel materials other than those indicated, since their
processing may pose a risk to the operators and damage the machine.
Before making any modifications, you must ask the N.KO company for the corresponding
approval. If you fail to do so, the N.KO company will reject any responsibility.
