26
6.3
Recommended transmission oils
6.4
Exchange of tools
Attention:
Wear protective gloves when exchanging tools.
When exchanging worn tools, proceed as follows:
-
Dismount the protective acrylic glass.
-
Dismount the upper thrust bar (two screws, position A, Fig. 6.4.1).
-
Loosen the main central roller and let the lower rest down to its lowest position.
-
Loosen the screw securing the tool (position B, Fig. 6.4.1) and remove the tool from
the shaft. If the tool cannot be dismounted easily, use a two-handed extractor.
-
Mount a new cutting tool (position C, Fig. 6.4.1) and retighten the securing screw
(position B, Fig. 6.4.1).
-
Remount the upper thrust bar (two screws, position A, Fig. 6.4.1) and the protective
acrylic glass.
