29
TECHNICAL DIAGRAMS
7.1. Wiring diagram
Q1.1- over-current protection relay – motor thermal protection
KM1, KM2- motor contactor
KM1.1, KM2.1- auxiliary contacts
S2.1, S22.2- push-button controller (STOP).
S3.1, S3.2- emergency push-button controller (NOT-AUS).
When operating the machine in areas with particularly dangerous influences, AD or
more, you must take measures to increase the machine protection against electric shock!
Electrical energy-
the electrical power supply must immediately be cut off in case of defects.
Work on the electrical equipment of the machine can only be done by a qualified electrician, or persons under
his supervision, so that the work complies with electrical engineering regulations.
