9
2.5
Residual risks
The machine has been designed and manufactured with all devices and equipment for health
protection and the safety of operators.
The machine is fully covered to minimize the risk of contact with movable parts.
There is, however, one risk remaining:
As mentioned above, the working zone is protected as much as possible; however, it has to
remain open partly to enable feeding of the material to be bevelled.
Therefore, there is a risk of the operator putting his/her fingers into the zone in which both the
cutting tool and the work piece holder are.
Attention:
Always keep your hands as far from the cutting zone as possible.
Attention:
Always apply the safety regulations contained in this manual and ensure their
observation and the elimination of all residual risks.
TECHNICAL SPECIFICATIONS
3.1
Machine description
The bevelling machine model UZ 15 Rapid has compact dimensions. One of its main features
is the adjustable bevel angle and automatic material feed.
The machine is equipped with a hardened cutting tool, sturdy work piece holder, direct-
reading scale used for setting values (bevel size and angle), and a special guide facilitating the
loading of material.
These characteristics enable easy setting of the working angle without exchange of the lower
cylinder, and precise regulation of the bevel angle.
The UZ 15 bevelling machine is reliable and requires minimum maintenance.