22
If profiles or rolled materials have small dimensions, the machine must be placed as
illustrated above (paragraph 4.2). In this case, the work pieces move during processing
(Fig. 5.4.2).
After adjusting and starting the machine, push the work piece to all stops, from right to left, so
that it can be caught by the cutting tool
. Protect the work piece coming out of the machine
from falling by grasping it with both hands and pushing it to the rear part of the
machine to prevent it spinning forwards.
KEEP IN
MIND the tool rotation direction.
The working direction is only clockwise. The opposite direction of rotation is used for
running the machine off an unfinished bevel in case of a defect or an impassable bevel.
Fig. 5.4.2