Myron L POOLPRO PS9TKB Operation Manual Download Page 59

Page: 59 / 74

2. Hardness Standard Solution

HARD(CaCl

)-200 solution is a solution of calcium chloride (CaCl

)

equivalent to 200 ppm calcium carbonate that is used for the hardness

calibration: Order HARD-200.

C. Titration Reagent Solutions

Titration reagents are required for all conductometric titrations - alkalinity

and hardness. Reagents are available in 2 oz. and quarts/liters.

1. Reagent: A1

Reagent: A1 is a ≤1%WV solution of sulfuric acid (H

-1) required for

alkalinity titration: Order H2SO4-1.

2. Reagent: HB

Reagent: HB is a ≤15% WV solution of pH buffer required for hardness

titration: Order HBUFF.

3. Reagent: H4

Reagent: H4 is a low concentration ≤5%WV solution of

Ethylenediaminetetraacetic acid (EDTA) required for hardness titration:

Order EDTA-B-LC.

4. Reagent: H5

Reagent: H5 is a high concentration ≤10%WV solution of

Ethylenediaminetetraacetic acid (EDTA) required for hardness titration:

Order EDTA-B-HC.

D. pH Buffer Solutions

pH buffers are available in pH values of 4, 7 and 10. Myron L

Company

buffer solutions are traceable to NIST certified pH references and are

color-coded for instant identification. They are also mold inhibited and

accurate to within ±0.01 pH units @ 25°C. Order 4, 7 or 10 Buffer.

Available in 2 oz., quarts/liters, and gallon/~3.8 liter bottles.

E. pH Sensor Storage Solution

Myron L

pH Sensor Storage Solution prolongs the life of the pH sensor.

Available in 2 oz., quarts/liters, and gallon/~3.8 liter bottles. Order SS.

F. ORP Sensor Conditioner Solution

Myron L

ORP Conditioner Solution removes contaminants and

conditions the ORP electrode. Available in 1 oz. Order ORPCOND1OZ.

G. Soft Protective Carry Cases

Padded Nylon carrying case features a belt clip for hands-free mobility.

Two colors to choose from;

Blue - Model #: UCC

Desert Tan - Model #: UCCDT

Summary of Contents for POOLPRO PS9TKB











































































Search results

Summary of Contents for POOLPRO PS9TKB

Reviews:

Brands by name

Popular brands

Myron L POOLPRO PS9TKB, Operation Manual

Search results

Summary of Contents for POOLPRO PS9TKB

Reviews:

Brands by name

Popular brands