37
2. “MEMORY” will appear and the temperature display will
be momentarily replaced by a number (1-100) showing the
position of the record. Figure 9 shows a reading of 1806 µS
stored in memory record #4.
B. Memory Recall
1.
Press any measurement key.
2.
Press
; “MEMORY” will appear, and the display will show
the last record stored.
3.
Press
or
to scroll to the record location desired
(the temperature display alternates between temperature
recorded and location number).
4.
Press
to display time and date stamp.
5.
Press any measurement key to leave memory recall or allow to
automatically turn off.
C. Clearing a Record/Memory Clear
After recalling a certain record location, press and HOLD
to
clear that memory. This space will be the place for the next memory
record, unless you scroll to another empty position before ending the
recall sequence. The next memory stored will go into the next highest
available memory location.
Example: You have locations 1-7 filled and wish to clear the
conductivity reading stored in record location #3 and replace it with a
pH reading.
1.
Press
and scroll to location #3.
2.
Press and HOLD
to clear old record #3.
3.
Fill pH/ORP sensor well with sample.
4.
Press
to measure sample and press
to store
reading in location #3.
Summary of Contents for POOLPRO PS9TKB
Page 1: ...ULTRAMETER III Operation Manual MODEL 9PTKB 24 July 2019 ...
Page 2: ......
Page 4: ...ii ...
Page 73: ...69 ...
