Drive Configuration
Manual No. 775029
2-43
☞
To save the expanded array configuration you’ve set up,
press Enter with Save Array selected.
A Notice is displayed at this point as shown in Figure 2-35.
Figure 2-35. Define Logical Drives or Return to Add Capacity Set-Up
You should define your additional logical drives for the expanded array at
this time unless you may wish first to expand other existing disk arrays.
☞
☞
☞
☞
To expand additional disk arrays, use the arrow key if
necessary to select No, then press Enter. Repeat the steps
described earlier in this section/
☞
To define logical drives at this time, use the arrow key if
necessary to select Yes, then press Enter.
❑
Define Logical Drives.
Logical drives for the array you want to expand are defined from the Logical
Drive Definition screen (Figure 2-36).
The disk array’s existing logical drives, if any, will be displayed. If logical
drives already exist, the stripe size setting for your new logical drives is
predetermined and unchangeable.
