How Do I Change SCSI Transfer Properties for a Controller?
3-12
RAID EzAssist User’s Manual
☞
Use the arrow keys to select the Tag Queueing field for the
desired channel, then...
☞
Press the + or - key to set the value to Yes or No as desired,
OR
☞
Press Spacebar to display a box of available choices, use the
arrow key to select your desired setting, then press Enter.
❑
View/Modify the Bus Width Setting.
Default = Negotiated Value
In general it is not necessary to change this parameter since the controller
“negotiates” the supported data bus width.
However, if you do wish to change this setting...
☞
Use the arrow keys to select the Bus Width (8=Narrow,
16=Wide) field for the desired channel, then...
☞
Press the + or - key to set the value to 16 or 8 as desired,
OR
☞
Press Spacebar to display a box of available choices, use the
arrow key to select your desired setting, then press Enter.
❑
Accept or Cancel Your SCSI Transfer Property Changes.
☞
To accept your SCSI Transfer property changes, press Enter,
OR
☞
To cancel any changes you’ve made, press the Esc key, or
press the Tab key, the arrow key to select Cancel, then press
Enter.
