First-Time Configuration
Manual No. 775029
1-27
☞
If you’re not satisfied with your drive selections, use the
arrow key to select Clear, then Press Enter. Press Tab to return to
Unused Drives.
Your selections will be erased and you can try again as described above.
☞
To save the array you’ve set up, press Enter with Save Array
selected.
A Notice is displayed at this point as shown in Figure 1-21.
Figure 1-21. Define Logical Drives or Return to Disk Array Set-Up
“Do you want to build additional arrays at this time?”
If you want to set up additional arrays, it is convenient to do so at this time
before logical drives are defined.
☛
Note
If you want to take advantage of “spanning” your
configuration across multiple arrays, you must build
the individual arrays FIRST, enable spanning, then
create logical drives that can make use of the spanned
capacity available. See the section “How Do I Make
Use of the Spanning Feature?” on page 2-71 in
Chapter 2 for more complete information about this
option.
