How Do I Add Capacity to an Existing Disk Array?
2-44
RAID EzAssist User’s Manual
Figure 2-36. Logical Drive Definition Screen
This screen uses the following navigation strategy:
• Arrow keys move among the logical drive definition fields.
• For RAID Level, Write Cache, and Stripe Size(KB)
1
definition fields,
the Spacebar brings up a list of valid options. Arrow keys move among
the options and Enter selects an option.
• For RAID Level, Write Cache, and Stripe Size(KB)
2
definition fields,
the + and - keys cycle through the valid options. When the desired
option is visible, use the arrow key to move to another field.
• For Physical Capacity or Logical Capacity definition fields, type a
numeric decimal value representing the desired capacity in GB. You
may choose one or the other field to adjust.
• The Tab key shifts control to the buttons, or from the buttons back to
the logical drive definition fields.
• When buttons are in focus, arrow keys select a button and Enter
activates the highlighted button. Arrow keys rotate selections through
Add Drive, Apply, Cancel, Clear All, and Delete Last.
1. Only if no logical drives have been defined previously.
2. Only if no logical drives have been defined previously.
