MUTOH VJ-1628TD, Operation Manual

Page: 67 / 274

VJ-1628TD, VJ-2628TD OPERATION MANUAL 3 Before using
3-35
10. Rewind the roll media a little by rolling the flange on the roll media holder while holding the edge
of the media, and eliminate any slack or slant.
NOTE
• If you set the roll media free while rewinding, the roll media will fall out from the media feed
slot on the rear of the product.
• Confirm that the right edge of the roll media does not go beyond the loading mark.
Failing to do so will make it difficult to detect the media width.
When setting the fabric media
NOTE
• When setting the fabric media, set both sides of the media at least 5 mm away from the edge of
the pressurizing roller.
Slippage or creases may occur during printing.
No. Name
1 Roll media
2 Media loading mark
1
2
1