Rockhopper 38 – Maintenance Manual
92
AP-74038, Rev. 1.1, 25/01/05
4.8 REPLACEMENT OF CARTRIDGE AREA
4.8.1 Replacing the Cutter Solenoid Assembly
Step 1 :
Remove the Unit Panel Cover. Refer to “Removing Unit Panel Cover”
Step 2 :
Remove the Front Cover. Refer to “Removing Front Cover”
Step 3 :
Remove the Y Rail Cover. Refer to “Removing Y Rail Cover”
Step 4 :
Disconnect connecter J206 (SOL) from the Head Board.
Step 5 :
Remove the Head Cover. Refer to “Removing Head Cover”
Step 6 :
Move the Head 20 to 30 cm to the left.
Step 7 :
From the back, remove the two fastening screws holding the solenoid.
Step 8 :
Remove the cutter cap, remove the solenoid.
Step 9 :
To install removed components, reverse the removal procedure.
Caution:
Be careful not to lose the O-rings. Initial filling and printing can not be done if the O-
rings are missing.
Don’t use a tool to tighten the coupling screws but get them as tight as possible with
your fingers. If you use a tool, there is a risk of breaking the plastic taps.
Summary of Contents for Rockhopper 38
