MUTOH Rockhopper 38, Maintenance Manual

Page: 161 / 258

Rockhopper 38 – Maintenance Manual
161
AP-74038, Rev. 1.1, 25/01/05
Step 15 :
Check the printing and enter a positive value to move the second line (CCW printing) towards the
Cap, or a negative value to move it in the opposite direction. Register first for Black, then for
Color. (After registering, the printer will print again.)
Repeat until all bidirectional printing is aligned.
Step 16 :
After completing Repeatability Printing Positioning, press [Back] to return to the previous menu.
Step 17 :
Implement the “CW Adjustment”. (Refer to “Adjust CW”)
This will compensate for any difference between the printing start position (5 mm from the edge
of the media) and the Color printing position relative to Black (pitch between heads).
Step 18 :
Next, check the printing and enter a positive value to move the Color towards the Cap with
respect to the Black or a negative value to move in the opposite direction. Register this value.
Repeat Steps 20 and 21 until the printing start position and the Black and Color positions are
aligned.
Step 19 :
When the compensating numbers have been entered, press [Back] to return to the previous
menu.
Step 20 :
Implement the “Flush Pointer Adjustment”. (Refer to “Adjust the Flush Pointer”)
Step 21 :
Switch off the power to the printer and the adjustments are finished.