MUTOH Rockhopper 38, Maintenance Manual

Page: 151 / 258

Rockhopper 38 – Maintenance Manual
151
AP-74038, Rev. 1.1, 25/01/05
6.3.3.1. Request correct MAC address
Step 1 :
Remove the Right Cover.
Step 2 :
Remove the Ethernet Board Cover.
Step 3 :
Onto the installed card you can see a sticker with a ‘FM0 number’.
Notes :
Write down this number ‘FM0 xxxxxx’. Important are the 6 digits ‘x’.
Step 4 :
Based on this number Mutoh Europe’s service department can provide you the correct MAC
address for your printer.
Step 5 :
Reinstall the covers.
6.3.3.2. Insert the MAC address into the printer
Step 1 :
Power on the unit in a special mode. Press the [POWER] key to power ON the unit, while
simultaneously holding the [F1], [F3] and [Menu
↑
] key.
Step 2 :
The unit will start up in special mode. Following message will appear on the display.
* Counter *
Indication InitMenu
F3
→
MACaddress
Step 3 :
Press the [F3] key to select the option ‘MAC Address’. Following message will appear on the
display.
* MAC address *
Input Password
Step 4 :
Press the [F2] key.
Step 5 :
Press the [F3] key.
Step 6 :
Press the [F1] key.
Step 7 :
Press the [F4] key.
Step 8 :
The password has been inserted. Use the [F1], [F2], [F3] and [F4] key to insert the MAC
address.
Step 9 :
Press the [ENTER] key to confirm.
Step 10 :
Press the [POWER] key to power OFF the unit.