2949
2950
6.13. Securing the position of the centre markers
1. When you drive along the second seeding lane, stop.
2. Stop the tractor, switch off the power and engage the parking brake.
3. Check the distance between the outermost seeding rows of the seeding lane.
The distance between the outermost seeding rows should be 150 mm.
4. If the distance is incorrect, adjust the tramline markers in accordance with section 5.3.6.
ADJUSTING THE CENTRE MARKERS .
6.14. Disconnecting from the tractor
DANGER
Crushing hazard when connecting or disconnecting the seed and fertiliser drill. Safety
distance 5 m. Be extremely careful if someone else is near the seed and fertiliser drill
and tractor giving instructions on connecting and disconnecting.
DANGER
Ensure that the tractor is turned off and the key is removed from the ignition.
Figure. 6.14. - 100. Lifting circuit cut-off valve
1. Close the cut-off valve (2) of the lifting circuit by turning the handle (1) perpendicularly to
the hydraulic hose.
2. Disconnect the electric connections of the seed and fertiliser drill.
3. Disconnect the hydraulic hoses of the seed and fertiliser drill from the tractor.
DANGER
Depressurise the hydraulic system before disconnecting it. Follow the tractor
manufacturer’s instructions.
Wear protective gloves when disconnecting the hydraulics.
Operation and maintenance
manual
Cerex 300
1.00
91 (156)
Summary of Contents for Cerex 300 SeedPilot
Page 159: ...Hydraulic schematic Appen dix 2 Cerex 300 1 Appendix 2 Hydraulic schematic...
Page 160: ...Hydraulic schematic Appen dix 2 Cerex 300 2...
Page 161: ...Electrical Diagram Annex 3 Cerex 300 1 Annex 3 Electrical Diagram...
Page 162: ...Electrical Diagram Annex 3 Cerex 300 2...
