2927
2928
6.5.3. Preparations preceding hopper filling in a machine with a
small seed hopper
1. Ensure that the stability of the tractor-seed and fertiliser combination has been
calculated.
Instructions for the calculation of the stability is provided in the attachment
Calculating the stability of the tractor - seed and fertiliser drill combination.
2. Ensure that the small seed hopper is empty, clean and dry.
If needed, clean the small seed hopper in accordance with section 7.3.2.
CLEANING THE SMALL SEED HOPPER.
3. Adjust the feeding quantity in accordance with section 6.5.10. ADJUSTING THE WIDTH OF
4. Adjust the position of the bottom ap of the small seed hopper’s feeder units in
accordance with section 6.5.11. ADJUSTING THE BOTTOM FLAP POSITION IN THE FEEDER
UNITS OF THE SMALL SEED HOPPER.
5. Adjust the shut-off plates of of the small seed hopper’s feeder units in accordance with
section 6.5.12. ADJUSTING THE SHUT-OFF PLATE POSITION IN THE FEEDER UNITS OF THE
6.5.4. Adjusting the hopper divider
Figure. 6.5.4. - 63. Adjusting the hopper divider
DANGER
Before adjusting the divider, ensure that the hoppers are empty.
1. Remove the two locking pins (10) of one side of the divider (11).
2. Push the divider to the appropriate position.
Operation and maintenance
manual
1.00
Cerex 300
66 (156)
Summary of Contents for Cerex 300 SeedPilot
Page 159: ...Hydraulic schematic Appen dix 2 Cerex 300 1 Appendix 2 Hydraulic schematic...
Page 160: ...Hydraulic schematic Appen dix 2 Cerex 300 2...
Page 161: ...Electrical Diagram Annex 3 Cerex 300 1 Annex 3 Electrical Diagram...
Page 162: ...Electrical Diagram Annex 3 Cerex 300 2...
