3003
4. Clean the fertiliser hopper with pressurised air.
5. Wash the fertiliser and seed hopper (4) with a detergent and warm water.
6. If needed, clean the hoppers with power wash.
CAUTION
Do not allow water to enter electrical devices.
7. Dry the hoppers with pressurised air.
8. Close the bottom aps of the feeder units.
7.3.2. Cleaning the small seed hopper
Wear protective goggles and protective gloves when cleaning the hoppers.
Clean the small seed hopper when the variety to be seeded changes and at the end of
the seeding season.
Figure. 7.3.2. - 149. Bottom ap open
1. Open the bottom ap by turning the control lever (1) downward.
Figure. 7.3.2. - 150. Cleaning of the small seed hopper
2. Clean the small seed hopper (1) with pressurised air.
3. Wash the small seed hopper with detergent and warm water.
4. If needed, clean the hopper with power wash.
Operation and maintenance
manual
Cerex 300
1.00
123 (156)
Summary of Contents for Cerex 300 SeedPilot
Page 159: ...Hydraulic schematic Appen dix 2 Cerex 300 1 Appendix 2 Hydraulic schematic...
Page 160: ...Hydraulic schematic Appen dix 2 Cerex 300 2...
Page 161: ...Electrical Diagram Annex 3 Cerex 300 1 Annex 3 Electrical Diagram...
Page 162: ...Electrical Diagram Annex 3 Cerex 300 2...