Figure. 6.1. - 54. Machine lifting circuit ball valve closed.
4. Ensure that the machine lifting circuit ball valve (2) is closed.
The ball valve is closed when the handle (1) is perpendicular to the hydraulic
hose.
5. Check the tyre pressure in accordance with section 7.1.3. CHECKING TYRE PRESSURE.
6. Ensure that the machine is clean.
If needed, clean the machine in accordance with section 7.3 CLEANING.
7. Visually check that the bolts of the transport wheels are tight in accordance with
section 7.1.2.1. CHECKING THE TIGHTNESS OF WHEEL BOLTS OF THE TRANSPORT
WHEELS and tighten, if needed.
8. Check that the bolts of the bearings are tight in accordance with section 7.1.2.2.
CHECKING THE TIGHTNESS OF THE BOLTS IN THE FLNAGE BEARINGS OF THE TRANSPORT
WHEELS and tighten, if needed.
9. If the machine is equipped with a standard drawbar, visually check that the bolts of the
towing device are tight in accordance with section 7.1.2.6. CHECKING THE TIGHTNESS OF
THE TOWING EYELET BOLTS and tighten, if needed.
Operation and maintenance
manual
1.00
Cerex 300
60 (156)
Summary of Contents for Cerex 300 SeedPilot
Page 159: ...Hydraulic schematic Appen dix 2 Cerex 300 1 Appendix 2 Hydraulic schematic...
Page 160: ...Hydraulic schematic Appen dix 2 Cerex 300 2...
Page 161: ...Electrical Diagram Annex 3 Cerex 300 1 Annex 3 Electrical Diagram...
Page 162: ...Electrical Diagram Annex 3 Cerex 300 2...
