Number
Hydraulic hose
Colour code and
symbol
1.
Drawbar adjustment connection
2 male connectors, size ½”
2.
Hydraulic connection of the coulter weight
adjustment
2 male connectors, size ½”
3.
Hydraulic connection for raising the machine to the
transport position
2 male connectors, size ½”
4.
Hydraulic connection for adjusting the position of the
front levelling board
2 male connectors, size ½”
6. Connect the power cable of the RDS controller to the outlet in the tractor cabin.
DANGER
Ensure that the tractor is turned off and the key is removed from the ignition.
Make sure the cable is not crushed by the tractor's rear window. Fasten the cable
properly so that it is not pinched during turns or lifting.
Number
Electrical connector
1.
RDS controller power cable
Connect DIN 9680 to the outlet in the
tractor
7. If needed, straighten the machine in accordance with section 5.5.3. ADJUSTING THE
LENGTHWISE LEVEL OF THE MACHINE WITH A TURNBUCKLE or 5.3.4. ADJUSTING THE
LENGTHWISE LEVEL OF THE MACHINE WITH A TOW BAR CYLINDER.
Operation and maintenance
manual
1.00
Cerex 300
52 (156)
Summary of Contents for Cerex 300 SeedPilot
Page 159: ...Hydraulic schematic Appen dix 2 Cerex 300 1 Appendix 2 Hydraulic schematic...
Page 160: ...Hydraulic schematic Appen dix 2 Cerex 300 2...
Page 161: ...Electrical Diagram Annex 3 Cerex 300 1 Annex 3 Electrical Diagram...
Page 162: ...Electrical Diagram Annex 3 Cerex 300 2...
