2967
2968
2969
7.1.2.6. Checking the tightness of the towing eyelet bolts
Figure. 7.1.2.6. - 118. Towing eyelet bolts
1. Check that the 12 bolts (1) of the towing eyelet are tight.
If needed, tighten the bolts to torque 400 Nm.
7.1.3. Checking tyre pressure
The correct rear tyre (250/80-18) pressure is 1.5 bar.
The correct tyre pressure of the wheel packer, available as an accessory, is 3.0 bar.
7.1.4. Checking the bearing clearance of the wheel packer hubs
Figure. 7.1.4. - 119. Checking the bearing clearance of the wheel packer hubs
Operation and maintenance
manual
1.00
Cerex 300
104 (156)
Summary of Contents for Cerex 300 SeedPilot
Page 159: ...Hydraulic schematic Appen dix 2 Cerex 300 1 Appendix 2 Hydraulic schematic...
Page 160: ...Hydraulic schematic Appen dix 2 Cerex 300 2...
Page 161: ...Electrical Diagram Annex 3 Cerex 300 1 Annex 3 Electrical Diagram...
Page 162: ...Electrical Diagram Annex 3 Cerex 300 2...
