Multitech MultiVOIP 200, User Manual

Page: 12 / 97

12
MultiVOIP 200 User Guide
Back Panel Description
The cable connections for the MultiVOIP are made at the back panel. Connectors include Power,
Command Port (RS232), Ethernet (10BASE-T), Voice/Fax Channels 1 and 2 (E&M, FXO and FXS).
The cable connectors are shown in Figure 1-5 and defined in the following groups.
Voice/Fax Channel 1
E&M FXS FXO
Voice/Fax Channel 2
FXO FXS E&M
1
0
Power
Ethernet RS232
Command
10Base-T
Figure 1-5. Back Panel
Power Connector
The Power connector is used to connect the external power supply to the MultiVOIP. The Power
connector is a 6-pin circular DIN connector. A standard computer power cord connects the power
supply to a live AC grounded outlet.
Command Connector
The Command connector is used to configure the MultiVOIP using a PC with an available serial port
and running Windows® software. The Command connector is an RJ-45 jack, and an adapter cable is
provided to convert to a standard serial port DB9 female connector.
10Base-T (Ethernet) Connector
The Ethernet 10Base-T connector is used to connect the MultiVOIP to a LAN using unshielded
twisted cable. This connector is an RJ-45 jack.
Voice/Fax Channel 1 and 2
The Voice/Fax Channel connectors include three options per channel: E&M, FXS and FXO.
E&M - This connector is used for connecting Voice/Fax Channel 1 or 2 to the E&M trunk on a PBX.
This connector is an RJ-45 jack.
FXS - This connector is used for connecting Voice/Fax Channel 1 or 2 to a station device; e.g., an
analog phone, a KTS phone system, or a fax machine. This connector is an RJ-11 jack.
FXO - This connector is used for connecting Voice/Fax Channel 1 or 2 to the station side of a PBX.
This connector is an RJ-11 jack.