![background image](http://html1.mh-extra.com/html/multiquip/rammax-rx1575/rammax-rx1575_operation-manual_1855337033.webp)
RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15) — PAGE 33
50
Rammax 1575
12
3004
7
| 21
.06
.201
3
7.1
Protection against vandalism
Always fold the vandalism protection cover upward before start-up of the roller.
The vandalism protection cover protects the display unit and the infrared sensor
from:
●
the effects of weathering
●
vandalism
●
alterations by third parties
If you wish to secure the display unit and the infrared sensor from unauthorized
access by third parties, you can install a padlock on the loop provided for this pur-
pose.
Commercially available padlocks can be obtained in any building supplies store.
Fig. 7-1 Vandalism protection cover opened/closed
7.2
Start the engine
7.2.1
Starting the engine using the ignition switch
7.2.2
Starting the engine using the infrared transmitter
1
Turn the ignition key clockwise to position I.
2
Hold the switch on the infrared sensor in the start position.
2.1
Preglow for a max. of 6sec.
3
Release the switch.
0
Off
All electrical loads are off.
I
Ignition on
All electrical consumers can be switched on.
II
Pre-heating
III
Start
OPERATION