![background image](http://html1.mh-extra.com/html/multiquip/rammax-rx1575/rammax-rx1575_operation-manual_1855337036.webp)
PAGE 36 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15)
Operation
53
123
0047
| 21.
06.
2013
Controller
opening angle
Fig. 7-4 Controller opening angle
NOTE
After a function has been executed, the engine speed is automatically increa-
sed to the working speed. If no function is executed for 15seconds, the engine
speed is automatically reduced to idling speed.
7.3.2
Driving forwards/backwards
1
Move the switch:
2a
Toward the front:
The roller moves forward.
2b
Toward the rear:
The roller moves backward.
7.3.3
Steering left/right
1
Move the switch:
2a
Toward the left:
The roller moves left.
2b
Toward the right:
The roller moves right.
7.3.4
Work gear /Transport gear
The roller is equipped with two gears.
1
Move the switch:
2a
Toward the top (rabbit):
the hydraulic system switches to the "transport gear"
drive level.
The roller drives at a high speed.
2b
Toward the bottom (0):
the hydraulic system switches to the “working gear"
drive level. The roller drives at a low speed.
50°
60°
70°
40°
20°
30°
10°
0°
2
4
6
8
10
12
14
16
18
20
m
OPERATION