![background image](http://html1.mh-extra.com/html/multiquip/rammax-rx1575/rammax-rx1575_operation-manual_1855337071.webp)
RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15) — PAGE 71
Repair
93
123
0047
| 21.
06.
2013
NOTE
The battery poles and terminals must be clean. If they are coated with a (whi-
tish or greenish) sulfur crust they must be cleaned.
10.1.2
Starting with another battery (jumpering)
1
Connect the red cable to the
(+)
terminals of both batteries.
2
Connect one end of the green or black cable to the
(-)
terminals of both batte-
ries.
3
Actuate the starter. Allow the engine to run.
4
Wait until the engine is idling smoothly and then disconnect the cables.
4.1
Begin with the
(-)
terminal.
NOTE
The battery poles and terminals must be clean. If they are coated with a (whi-
tish or greenish) sulfur crust they must be removed and cleaned.
10.1.3
Charging the battery using a battery charger
1
Disconnect the battery.
2
Connect the battery charger.
2.1
Observe the battery charger manufacturer’s manual.
3
Start with the
(+)
terminal when reconnecting the battery.
NOTE
The battery poles and terminals must be clean. If they are coated with a (whi-
tish or greenish) sulfur crust they must be removed and cleaned.
10.1.4
Long-term storage
Remove the negative battery cable from the battery if a standstill period of more than
two weeks is expected.
10.2
Fuses
DANGER
There is danger to life if the roller does not stop in hazardous
situations!
• Fuses and safety switches must never be shorted.
!
REPAIR