PAGE 84 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15)
108
Rammax 1575
123
0047
| 21.
06.
2013
12.1
Transport
12.1.1
Shipping weights and dimensions
Tab. 12-1 Shipping weights and dimensions
12.1.2
Joint protection
Articulated joint
blocking
1
Release the lower part of the joint protection
(1)
.
1.1
First, remove the compression spring
(2)
and then the lock bolt
(3)
.
2
Carefully turn the roller steering until the joint protection comes in line with the
opposite loop.
NOTE
In order to operate the steering, you must start the roller and maintain a distan-
ce of at least 2meters.
3
Hook the joint protection into place.
4
Secure the joint protection with the lock bolt
(3)
.
5
Secure the lock bolt with the compression spring
(2)
.
Rammax 1575
Roller drum width (mm)
640
850
Shipping weight (kg)
1400
1450
Dimensions: L x W x H - without shutdown bar (cm)
200 x 64 x 132
200 x 85 x 132
Dimensions: L x W x H - with shutdown bar folded upwards (cm)
205 x 64 x 132
205 x 85 x 132
DANGER
Risk of crushing through presence in the pivoting area (dan-
ger zone)!
• The articulated joint lock (joint protection) must be fitted before
lifting the roller for transport.
• Be certain that no persons are present in the area of the joint
protection.
!
DANGER
Risk of crushing through presence in the pivoting area (dan-
ger zone)!
• As soon as the roller is aligned, shut if off again.
!
TRANSPORT