![background image](http://html1.mh-extra.com/html/multiquip/rammax-rx1575/rammax-rx1575_operation-manual_1855337070.webp)
PAGE 70 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15)
92
Rammax 1575
123
0047
| 21.
06.
2013
10.1
Battery
NOTE
Risk of cable fire or short circuit.
Keep to the proper sequence when removing or installing the terminal connec-
tions.
●
Ignition on = battery voltage. The battery voltage should not fall below 10 volts
while starting, otherwise the battery must be charged.
●
Machine running = alternator charging voltage. The voltage should lie in a range
of from 13 to 14.5 volts.
10.1.1
Replacing the battery
1
Loosen the
(-)
terminal and disconnect it (size13).
2
Loosen the
(+)
terminal and disconnect it (size10).
3
Loosen and remove the mounting bracket.
Fig. 10-1 Loosening the terminals
4
Lift the battery out of the engine compartment.
5
Set the new battery in place.
6
Connect the battery.
6.1
Begin with the
(+)
terminal.
Fig. 10-2 Replacing the battery
REPAIR