![background image](http://html1.mh-extra.com/html/multiquip/rammax-rx1575/rammax-rx1575_operation-manual_1855337030.webp)
PAGE 30 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15)
44
Rammax 1575
123
0047
| 21.
06.
2013
5.2.4
Handling
Sticker
The infrared transmitter is located in the black lower part of the housing. It contains
the following transmission elements:
●
The solar cells
●
The infrared diodes for data transmission and measuring the safety distance.
●
Before startup, clean the transmission elements.
●
Before startup, be sure that the solar cells in the lower part of the housing are not
covered over.
●
Keep the solar cells clean during operation.
Wear the infrared transmitter correctly
1
Pay attention to correct positioning.
1.1
The cable connector must face forwards or be oriented according to the
sticker on the transmitter. The infrared transmitter may rest on the sto-
mach of the operator.
1.2
Adjust the strap for the correct length to ensure optimal wearing com-
fort.
2
Pay attention to correct operation.
2.1
Only hold the housing by the upper part; see the warning information.
CAUTION
Accident hazard due to covered over lower part of the
housing!
• Before and during operation with the infrared transmitter, make
sure that the entire lower part of the housing remains comple-
tely uncovered for the entire time of operation.
• In particular, the operator’s hand must not cover the lower part
of the housing even partially.
!
OPERATING AND DISPLAY ELEMENTS