PAGE 46 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15)
66
Rammax 1575
12
300
47
|
21
.06
.20
13
9.5
Opening the hood, front and rear
There is one locking device each on the front and back as well as the left and right
of the roller.
1
Open both catches, on the right and the left.
2
Open the hood.
2.1
Lift the hood with slight pressure toward the center of the roller.
2.2*
If the hood is defective, replace it immediately.
Fig. 9-1 Locking device
NOTE
Two gas struts reduce the force required to open the hood and give it its final
position. If you need more force to open the hood, replace the gas
absorbers. See
When replacing fuses, do not mix them up
.
DANGER
Danger of severe injury through loose clothing being caught
and drawn in!
• Only open the engine hood when the engine is switched off.
• If trouble shooting makes working on moving parts (engine or
roller) unavoidable,
never
wear: Necklaces, bracelets, rings,
scarves, ties or other loose items of clothing.
If any of these get caught in moving parts there is a danger of
serious injury!
WARNING
Danger of scalding from hot water / steam!
• Only work on a cool engine.
• Keep enough distance to the exhaust.
!
!
MAINTENANCE