UPGRADING SETPOINT FILE TO NEW REVISION
8. 469PC PROGRAM
8-8
8.7 UPGRADING SETPOINT FILE TO NEW REVISION
It may be necessary to upgrade the revision code for a previously saved Setpoint file when the firmware of the SR469 is upgraded.
1. To upgrade the revision of a previously saved Setpoint file, run the 469 PC program and establish communications with the SR469
through the front RS232 port.
2. Select Actual, Product Information from the menu and record the Main Revision
number of the relay’s firmware, e.g. 30D251A8.000, where 251 is the Main Revision
identifier.
3. Select File, Open from the menu and enter the location and file name of the saved
Setpoint File to be downloaded to the connected relay. When the file is open, the 469PC
program will be in “File Editing” mode and “Not Communicating”.
4. Select File, Properties from the menu and note the version code of the setpoint file. If
the Main Revision code of the Setpoint File (e.g. 23X) is different than the Main Revision
code of the Firmware (as noted in step 2, as 251), use the pull-down tab to expose the
available revision codes and select the one which matches the Firmware
e.g. Firmware revision: 30D251A8.000
current setpoint file revision: 23X
change Setpoint file revision to 25X
5. Select File, Save to save the Setpoint file to Disk.
6. See Section 8.6 for downloading this setpoint file to the connected SR469.
Figure 8-8 UPGRADING SETPOINT FILE TO NEW REVISION
Summary of Contents for SR469
