manualshive.com logo in svg

Multilin SR469, Instruction Manual

Share
Download
Multilin SR469 Instruction Manual Download Page 240

8. 469PC PROGRAM

PRINTING  

8-9

8.8 PRINTING

1. To print the Relay Setpoints, run the 469PC program, it is not necessry to establish communications with a connected SR469.

2. Select File, Open to open a previously saved Setpoint File
  or
Establish communications with a SR469 connected to the computer to print the current
Setpoints.

3. Select File, Page Setup and highlight one of the Setpoints bubbles. Select OK.

4. Select File, Print and OK to send the Setpoint file to the connected printer.

1. To print the Relay Actual Values, run the 469PC program and establish communications with a connected SR469.

2. Select File, Page Setup and highlight the Actual Values bubble.

3. Under Print Setup, ensure that your specific printer is setup to Print True Types as
Graphics.

5. Select OK to close this window.

6. Select File, Print and OK to send the Setpoint file to the connected printer.

Figure 8-9 PRINTING

Summary of Contents for SR469















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands