manualshive.com logo in svg

Multilin SR469, Instruction Manual

Share
Download
Multilin SR469 Instruction Manual Download Page 241

TRENDING  

8. 469PC PROGRAM

8-10

8.9 TRENDING

Trending from the SR469 can be accomplished via the 469PC program. Many different paramters can be trended and graphed at
sampling periods ranging from 1 second up to 1 hour.

The parameters which can be Trended by the 469PC program are:

Currents/Voltages
Phase Currents A,B&C

Avg. Phase Current

Motor Load

Current Unbalance

Ground Current

Differential Currents A,B & C

System Frequency

Voltages Vab, Vbc, Vca Van, Vbn & Vcn
Power
Power Factor 

Real Power (kW)

Reactive Power (kvar)

Apparent Power (kVA)

Positive Watthours

Positive Varhours

Negative Varhours

Temperature
Hottest Stator RTD

Thermal Capacity Used

RTD’s 1 through 12

Demands
Current

Peak Current 

Reactive Power

Peak Reactive Power,

Apparent Power

Peak Apparent Power

Others
Analog Inputs 1,2 3 & 4

Tachometer

1. To use the Trending function, run the 469PC program and establish communications with a connected SR469 relay.

2. Select Actual , Trending from the main menu to open the Trending window.

3. Press the Setup button to enter the Graph Attribute page.

4. Program the Graphs which are to be displayed by selecting the pull down menu beside
each Graph Description. Change the Color, Style, Width, Group #, and Spline selection
as desired.
Select the same Group # for all paramaters to be scaled together.

5. Select Save to store these Graph Attributes, and OK to close this window.

7. Use the pulldown menu to select the Sample Rate, click the checkboxes of the Graphs to
be displayed, and select RUN to begin the trending sampling.

8. Print will copy the window to the system printer. More information for navigating through
Trending can be found under Help.

Summary of Contents for SR469















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands